Diagram 181/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Data Bus On Board Diagnostic Interface, Steering Column Electronic Systems Control Module, Turn Signal Switch, Headlamp Dimmer/Flasher Switch, Lamp Failure Indicator Lamp





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E2 - Turn Signal Switch

E4 - Headlamp Dimmer/Flasher Switch

J285 - Instrument Cluster Control Module

J519 - Vehicle Electrical System Control Module

J527 - Steering Column Electronic Systems Control Module Locations

J533 - Data Bus On Board Diagnostic Interface, in left footwell, near center console

K170 - Lamp Failure Indicator Lamp

T10y - 10-Pin Connector

T20 - 20-Pin Connector

T20d - 20-Pin Connector

T36 - 36-Pin Connector

(44) - Ground Connection (on left lower A-pillar) Overview of Ground Connections In Interior

(367) - Ground Connection 2 (in main wiring harness)

(605) - Ground Connection (on upper steering column) Overview of Ground Connections In Interior

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

Previous Diagram 181/6 (Tracks 57-70)

Next Diagram 181/8 (Tracks 85-98)