Halogen Headlamps Assembly Overview

Halogen Headlamps Assembly Overview

NOTE: In the exploded view illustration, the positioning motors of the three headlamp manufacturers are depicted, since the removal and installation of them differ.







1 - Screws
- 4 Nm
2 - Adjustment bushings
- Correcting installation position of headlamp
3 - Left High Beam Headlamp M30 and Right High Beam Headlamp M32
- Lamp H7U 12 V, 55 W
4 - Left Parking Lamp M1 and Right Parking Lamp M3
- Lamp 12 V, W 5 W
5 - Cap
6 - Left Front Turn Signal Lamp M5 and Right Front Turn Signal Lamp M7
- Bulb 12 V, PY 21 W
7 - Lamp socket with grip piece
- for Left Front Turn Signal Lamp M5 and Right Front Turn Signal Lamp M7
8 - Body cross section
9 - Left Headlamp Beam Adjusting Motor V48 and Right Headlamp Beam Adjusting Motor V49
- Headlamp manufacturer: Automotive Lighting, removing and installing

NOTE: For the first removal of Left Headlamp Beam Adjustment Motor V48 and Right Headlamp Beam Adjustment Motor V49 requires a repair set.

10 - Cap
11 - Screws
- only with manufacturer: AL (Automotive Lighting)
- for Left Headlamp Beam Adjusting Motor V48 and Right Headlamp Beam Adjusting Motor V49
12 - Left Headlamp Beam Adjusting Motor V48 and Right Headlamp Beam Adjusting Motor V49
- Headlamp manufacturer: Visteon, removing and installing
13 - Clamping ring
14 - Left Headlamp Beam Adjusting Motor V48 and Right Headlamp Beam Adjusting Motor V49
- Headlamp manufacturer: Hella, removing and installing
15 - Clamping ring
16 - Lamp socket with grip piece
- for Left Low Beam Headlamp M29 and Right Low Beam Headlamp M31
17 - Left Low Beam Headlamp M29 and Right Low Beam Headlamp M31
- Bulb H7 12 V, 55 W
18 - Headlamp
- Correcting installation position of headlamp
- Servicing headlamp securing straps