Center Instrument Panel Switch

Center Instrument Panel Switch

The same procedure is used to remove and install the following components. The procedure is only described for one component.

• Driver Heated Seat Adjuster (E94)

• Front Passenger Heated Seat Adjuster (E95)

• Emergency Flasher Switch (E3)

• Parking Aid Button (E266)

• Front Passenger's Airbag Disabled Indicator Lamp (K145)


When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

Removal

- Turn off the ignition and all electric consumers and remove the key.

- In vehicles without radio/navigation system or radio, pry cover (radio cut-out) from mounts.

- If necessary, remove radio.

- If necessary, remove radio/navigation system.

- Press switch out of installation frame from behind.






- Release and disconnect the connector - arrow -.






Installation

Install in reverse order of removal.