Diagram 12/18 (Tracks 225-238)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM) 2, Bank 2 Exhaust Gas Temperature (EGT) Sensor 1, Pump/Injector Valve (cylinder 6-10)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G236 - Bank 2 Exhaust Gas Temperature (EGT) Sensor 1 Locations

J624 - Engine Control Module (ECM) 2 Control Modules In Engine Compartment

N245 - Pump/Injector Valve (cylinder 6)

N303 - Pump/Injector Valve (cylinder 7)

N304 - Pump/Injector Valve (cylinder 8)

N305 - Pump/Injector Valve (cylinder 9)

N306 - Pump/Injector Valve (cylinder 10)

T2bw - Double Connector

T2cs - Double Connector

T2ct - Double Connector

T2cu - Double Connector

T2cv - Double Connector

T2cw - Double Connector

T7mp - 7-Pin Connector, Pump/Injector, right

T60ab - 60-Pin Connector

T94ab - 94-Pin Connector

(D137) - Connection 2 (injectors), (in engine compartment wiring harness)

(E55) - Fuel Injector Connection 2 (in fuel injection wiring harness)

Previous Diagram 12/17 (Tracks 211-224)

Next Diagram 12/19 (Tracks 239-252)