Diagram 12/22 (Tracks 281-294)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster Control Module, Data Bus On Board Diagnostic Interface, Fuel Pump (FP), Fuel Level Sensor 2, Fuel Gauge, Glow Plug and Diesel Particle Filter Indicator Lamp, Data Link Connector (DLC)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G1 - Fuel Gauge

G23 - Fuel Pump Locations

G169 - Fuel Level Sensor 2 Locations

J285 - Instrument Cluster Control Module Control Modules in Rear Seats

J533 - Data Bus On Board Diagnostic Interface Control Modules in Rear Seats

K - Instrument Cluster

K29 - Glow Plug Indicator Lamp

K231 - Diesel Particle Filter Indicator Lamp

T4cu - 4-Pin Connector, black, fuel delivery unit, left

T16b - 16-Pin Connector, Data Link Connector (DLC), Driver's Footwell

T32a - 32-Pin Connector, blue

T32b - 32-Pin Connector, green

(39) - Ground Connection (below rear seat bench, left) Overview Of Ground Connections In Interior

(410) - Sensor Ground Connection 1 (in main wiring harness)

(B385) - Powertrain CAN-Bus High Connection 3 (in main wiring harness)

(B392) - Powertrain CAN-Bus Low Connection 3 (in main wiring harness)

(B429) - Fuel Pump (FP) Relay Connection (in main wiring harness)

(B444) - OBD Connection 1 (in main wiring harness)

(B486) - Connection 22 (in main wiring harness)

Previous Diagram 12/21 (Tracks 267-280)

Next Diagram 12/23 (Tracks 295-308)