Access/Start Authorization Button (E408)

Access/Start Authorization Button (E408)

Removal

- Turn off the ignition and all electric consumers and remove the key.


When disconnecting battery, procedure must always be followed as described in the repair manual => [ Disconnecting Sequence ] One-Battery Layout with Auxiliary Battery and Two Battery Layout, Disconnecting and Connecting. Not adhering to sequence will result in the deactivation of Main Battery Switch -E74- and subsequent damage to electrical system components.

- Disconnect the battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove gear selector cover.

- Remove screws - arrows -.






- Disconnect electrical connector.

- Remove Access/Start Authorization Button (E408).

Installation

Install in reverse order of removal. Note the following:

• Adaptation or coding of Access/Start Authorization Button after removing and installing is not necessary.