Diagram 69/20 (Tracks 253-266)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster Control Module, Oil Pressure Switch, Oil Level Thermal Sensor, Multi-function Indicator (MFA), Electronic Power Control (EPC) Warning Lamp, Data Link Connector (DLC)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F1 - Oil Pressure Switch Locations

G266 - Oil Level Thermal Sensor Locations

J119 - Multi-function Indicator

J285 - Instrument Cluster Control Module Control Modules in Rear Seats

J533 - Data Bus On Board Diagnostic Interface Control Modules in Rear Seats

K - Instrument Cluster

K132 - Electronic Power Control (EPC) Warning Lamp

SB50 - Fuse 50 (on fuse panel B) Overview Of Fuses Overview Of Fuses

T1ac - Single Connector, black

T3bd - 3-Pin Connector, black

T10d - 10-Pin Connector, blue, electronics box, engine compartment Overview Of Connector Stations And Connectors

T10f - 10-Pin Connector, red, electronics box, front engine compartment Overview Of Connector Stations And Connectors

T16b - 16-Pin Connector, Data Link Connector (DLC), Driver's Footwell

T32a - 32-Pin Connector, blue

T32b - 32-Pin Connector, green

(32) - Ground Connection (behind instrument panel, left) Overview Of Ground Connections In Interior

(B385) - Powertrain CAN-Bus High Connection 3 (in main wiring harness)

(B392) - Powertrain CAN-Bus Low Connection 3 (in main wiring harness)

(B444) - OBD Connection 1 (in main wiring harness)

(B509) - OBD Connection 3 (in main wiring harness)

(D106) - Connection 4 (in engine compartment wiring harness)

Previous Diagram 69/19 (Tracks 239-252)