Air Conditioner Compressor and Bracket, Engine Codes BKS, CASA, CATA, CASB and CASC

Air Conditioner Compressor and Bracket, Engine Codes BKS, CASA, CATA, CASB and CASC

• Refrigerant must be extracted before hand using e.g. A/C Service Station (VAS 6007A).

• Observe notes, refer to => [ Engine Compartment Refrigerant Circuit Components, 2 Zone and 4 Zone ] Engine Compartment Refrigerant Circuit Components, 2 Zone and 4 Zone

• The tightening specification for bolts on the refrigerant lines to the A/C compressor is 20 ± 3 Nm.





1 Crankcase

2 Auxiliary component bracket for A/C compressor

• No. on housing 059 145 169 P

3 O-ring

• Always replace O-ring

4 9 Nm

5 Coolant pipe

6 9 Nm

7 40 Nm

8 20 ± 3 Nm

9 A/C Compressor

• Removing:

- Removing ribbed belt.

- P.A.S. vane pump.

- Disconnect the connector on the A/C compressor.

• Make sure the connector is secure on the A/C compressor.

- Remove the refrigerant line from the bracket - 10 - and - 12 -.

- Remove refrigerant lines from A/C compressor.

• The bolt tightening specification is 20 ± 3 Nm.

10 Refrigerant line bracket

11 25 Nm

• Quantity: 3

12 Refrigerant line bracket

13 Ribbed belt pulley - A/C system compressor

• Position of ribbed V-belt. Refer to=> [ Ribbed Belt Routing, Engine Codes AYH, BKW and BLE ] Ribbed Belt Routing, Engine Codes AYH, BKW and BLE

14 Dowel sleeves

• Ensure correct seating in auxiliary component bracket and A/C compressor when installing.

15 25 Nm

16 40 Nm

17 9 Nm

18 Cover

19 9 Nm

20 Seal

• Always replace seal

• Ensure correct seating in auxiliary component bracket when installing.