Used Immobilizer Identity Used New Access/Start Authorization Control Module and Used Engine Control Module

Used Immobilizer Identity Used New Access/Start Authorization Control Module and Used Engine Control Module

Special tools, testers and auxiliary items required

• Vehicle Diagnosis, Testing and Information System (VAS 5051A)

• To establish a new identity with used components, note the following:

• Order the ignition key with the new identity before setting up.

• The ignition key with the old identity is still needed when setting up.

New identity immobilizer with used access/start authorization control module and used engine control module.

- Connect the (VAS 5051A).

- In (VAS 5051A) , select operating mode "Guided Fault Finding".

- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:

• Body

• Electrical Equipment

• 01 - On Board Diagnostic (OBD) capable systems

• Immobilizer with download

• Functions

• New identity with old FBS and ECM