Glass Panel, Adjusting Parallel Movement

Glass Panel, Adjusting Parallel Movement

• The parallel movement adjustment can only be performed with removed drive motor and glass panel (in zero position).

- Remove drive motor for sunroof, refer to => [ Drive Motor for Sunroof ] Drive Motor for Sunroof.

Marking - arrow - on upper part of rear guide - 1 - must be located on both sides between markings - dimension a - at link guide - 2 -.





Link guide - 2 - must be engaged in guide rail (cannot be moved by hand).

- Slide upper part of guide - 1 - only from front toward rear center, between markings.

- Install drive motor (zero position) in this position.

Then check the zero position.