Right Bench Seat, through Calendar Week 47.2006

Right Bench Seat, through Calendar Week 47.2006

Removing

- Fold right seat cushion forward.

- On vehicles with seat heating, switch ignition off and disconnect seat heating wiring harness.

- Remove the two bolts - 1 - (50 Nm).

- Remove the two bolts - 2 - (50 Nm).

• The bolts are microencapsulated and must therefore be replaced after every removal.

• Before installing the new bolts, the threads of the corresponding nuts must be cleaned.

- Remove the bench seat from vehicle.





Installation

- To install, perform the steps used for removal in reverse order.