Instrument Cluster

Instrument Cluster

Special tools, testers and auxiliary items required

• Release Lever (T10039)

• Wedge (T10039/1)

Removal

• It is not necessary to remove the steering wheel. To improve clarity, the steering wheel is not shown in the following illustrations.

• If the instrument panel insert is to be replaced, refer to => [ Instrument Cluster, Removing and Installing ] [1][2]Instrument Cluster.

- Using the electrical or mechanical adjustment mechanism, fully extend and lower the steering wheel.

- Turn off the ignition and all electric consumers and remove the key.

- Pry trim strips - 1 - and - 2 - out of locking mechanisms using (T10039/1).






- Remove bolts - 1 - from upper cover piece of steering column - 2 - and remove it.






- Remove instrument cluster visor.

- Remove bolts - 1 - from bracket of instrument cluster visor - 2 -.






- Remove screws - 1 -.






- Remove bracket for instrument cluster visor - 1 - upward in - direction of arrow -.






- Remove instrument cluster and disconnect harness connectors - 1 - on rear side of instrument cluster.






Installation

Install in reverse order of removal. Note the following:

- Place the instrument panel insert into the opening and connect the connectors.

- Install bracket for instrument cluster visor.

- After installing, test the functions of the instrument cluster.