Glove Compartment Lamp Switch (E26)

Glove Compartment Lamp Switch (E26)

• The illustration shows glove compartment lamp switch - 1 - with instrument cluster removed. The instrument panel does not need to be removed in order to remove and install the switch.






• Glove compartment lamp switch - 1 - can be reached starting from foot well and can be unclipped.

• The wire to the glove compartment lamp switch - 1 - is long enough to pull the glove compartment lamp switch with wire connected into foot well and then to disconnect the harness connector.

Removal

- Unclip Glove Compartment Lamp Switch (E26) - 1 - with connected wire from bracket - arrows A -.

- Pull out Glove Compartment Lamp Switch (E26) - 1 - downward behind instrument cluster - arrow B - and disconnect harness connector.

Installation:

Install in reverse order of removal.