Front Interior/Reading Lamp Button Module

Front Interior/Reading Lamp Button Module

The button module consists of the following components:

• Front interior lamp button (E326)

• Driver reading lamp button (E457)

• Front passenger reading lamp button (E458)


When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

• Buttons cannot be replaced separately. If repairs are necessary, the entire button module must be replaced.

Removal

- Turn off the ignition and all electric consumers and remove the key.

- Carefully pry cover out of console in molded headliner - arrow -.






- Carefully pry button module for interior reading light out of console in molded headliner - arrow -.






- Release and disconnect the connector - arrow -.






- Unclip both microphones of hands-free equipment.

- Disengage retaining tabs - arrows - and remove button module from frame.






Installation

Install in reverse order of removal.