Adaptive Cruise Control, Calibrating During Vehicle Alignment

Adaptive Cruise Control, Calibrating During Vehicle Alignment

Observe the following work sequence!

- Observe the notes in your alignment unit and specifications in general information. Refer to => [ Adaptive Cruise Control Calibration Information ] Adaptive Cruise Control Calibration Information.

Measuring Procedure






Space Requirements in Front of Vehicle





- a - = 1145 mm

Distance - a - is distance between Automatic Cruise Control (ACC) sensor (G550) mirror and ACC adjustment tool (VAS 6041) measuring field

• If necessary, use precision spoiler adapter (V.A.G 1813/12) to equalize height between (VAS 6041) and vehicle alignment platform.

VW Emblem, Removing





- Guide a screw driver through opening - arrow A - and press tab - arrow B - downward.

- Remove VW emblem.

Automatic Cruise Control (ACC) Sensor (G550) Adjusting Screw Identification





1. Horizontal or measuring block 6-2 adjusting screw

2. Vertical or measuring block 6-3 adjusting screw

3. must not be turned - functions only as a pivot point

Explanation of Axles and Display in VAS 505X





Y Measuring block 6-2
X Measuring block 6-3

Example:

Value 0.1 corresponds to 4 mm on (VAS 6041/2)

With a measuring block 6-2, display in VAS 505X shows a value of 0.6 and measuring block 6-3 a value of -1.0.

These values lead to a measuring point - arrow - that consists of the following values:

- a - = 24 mm

- b - = 40 mm

Menu in VAS 505X:

- Press the following buttons on the screen one after the other:

• Suspension

• Distance Control

• 01 - On Board Diagnostic (OBD) Capable Systems

• Function

• Adaptation to Adjustment on Alignment Stand