Generator, Air-Cooled Overview

Generator, Air-Cooled Overview






1 - Hex Head Combination Bolt

• 40 Nm

• M10 x 35 mm

2 - Bracket

3 - Idler Pulley

4 - Screw

• 23 Nm

• M8 x 25 mm

5 - Protective Cap

6 - Hex Flange Bolt

• M8 x 90 mm

• 22 Nm

7 - Ribbed Belt Pulley

• 25 Nm + 60 °

8 - Ribbed Belt

• Checking ribbed belt, refer to => [ Ribbed Belt, Checking ] Testing and Inspection.

9 - Generator

• B+ wire fastener to generator, 20 Nm, refer to => [ B+ Cable Mount on Generator ] Procedures.

• Generator, removing and installing, refer to => [ Generator, Air Cooled ] Generator, Air Cooled.

• Generator ribbed belt pulley, removing and installing, refer to => [ Ribbed Belt Pulley on Generator, Air Cooled ] Ribbed Belt Pulley on Generator, Air Cooled.

- - Voltage Regulator

• Voltage regulator, removing and installing (only Valeo 059.903.015.R), refer to => [ Voltage Regulator, Air Cooled Generator ] Service and Repair.