Rear Lid Striker Pin, Adjusting

Rear Lid Striker Pin, Adjusting

• By loosening the bolts - 1 -, the catch - 2 - can be slid into the larger openings.

• Adjust the striker pin - 2 - so that the rear lid lock recess with the rotary latch engages with the center of the striker pin - 2 -.

- Remove the lock carrier cover:.






- Loosen the bolts - 1 -, but do not remove them.

- Move the rear lid catch - 2 - into the upper position and tighten the bolts - 1 -.

- Lock the rear lid and check the adjustment.

- Tightening specifications for bolts - 1 -: 18 Nm.