Attachments Assembly Overview from January 2011

Attachments Assembly Overview from January 2011






1 Front bumper cover

• PP/EPDM material

2 Cover

• Left and right

• For the spray nozzle telescopic cylinder.

3 Fog lamp frame

• Left and right

• Pull the spoiler extension forward out of the retainers in the bumper cover; it is not necessary to remove the bumper cover

• There are different versions, allocation, refer to the Parts Catalog.

4 Upper trim strip

• Left and right

• Depending on the model version

5 Lower trim strip

• Left and right

• Depending on the model version

6 Center vent grille

• Is removed from the bumper cover after removing the frames for the fog lamps - 3 - from the retainer. It is not necessary to remove the bumper cover.

• There are different versions, allocation, refer to the Parts Catalog.

7 Spoiler extension

• Pull the spoiler extension forward out of the retainers in the bumper cover; it is not necessary to remove the bumper cover

8 Cover

• For the towing eye.