B-Pillar Trim Mount

B-Pillar Trim Mount

• The expanding nuts are gas-tight and seal the passenger compartment with respect to outside air.

• Prior to installing the bracket, check expanding nuts - 5 - for damage and correct seating. Replace the expanding nuts if necessary

• The illustration shows the left side. The right side is identical.






• The door windows are adjusted.

Installing an Existing Bracket

- Gently tighten the bolts - 3 -.

- Slide the trim - 1 - onto the mount - 6 - and gently tighten the screws.

- Check the gap dimensions.

- Remove the trim and tighten the mount screws. Screw tightening specification - 3 -: 2 Nm.

Installing a New Bracket

- Gently tighten the bolts - 3 -.

- Align the mount - 6 - evenly with the door windows using the adjustment markings - arrows - on the retaining tabs - 7 -.

- Tighten the bolts - 3 - to the bolt tightening specification: 2 Nm.

- Break off the retaining tabs - 7 - with the adjustment marks.