License Plate Holder

License Plate Holder

• For some markets, radiator grille is supplied without license plate holder.

• Only one type of license plate holder is illustrated. The description applies accordingly to all types of license plate holders.

• It is possible that there is a different number of clips.

Removing






- Remove the clips - 2 - and remove the license plate holder - 1 - from the radiator grille.

Installation






With Holes Present

- Attach the license plate holder - 1 - to the radiator grille and press in the clips - 2 -.

With No Holes Present

• On vehicles with front parking assist, a depth dimension of 12 mm must be maintained when boring holes.

• The parking assist wiring harness is routed at the height of the upper bore holes on the bumper carrier.

- Align the license plate holder - 1 - to the emblem - 3 - on the radiator grille.

- Make a 12 mm stop depth mark and drill the holes.

- Attach the license plate holder - 1 - to the radiator grille and press in the clips - 2 -.