Mirror Glass

Mirror Glass

Special tools, testers and auxiliary items required

• Wedges (T10383)

• The following describes removing and installing the left mirror glass only. Removing and installing the right mirror glass is identical.

Wear protective eye wear and gloves when doing this!

Removing






- Protect the edges of the housing from paint damage, for example by using fabric-reinforced adhesive tape.

- Press the mirror glass - 1 - into the mirror housing at top - arrow -.

- Remove the mirror glass - 1 - with the wedge (T10383) from the mount - 4 - and the housing - 2 -.

- Move the mirror glass - 1 - to the side - arrow - and disconnect the connector - 3 - for the mirror heating from the back of the mirror - 1 -.

Installation

- Connect the mirror heating connector to the mirror glass.

- Press the center of the mirror glass onto the retainer in the housing.

- The mirror glass will engage with a click.

• Then the functionality test is performed.