Power Seat Trim

Power Seat Trim

The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.

Removing

- Remove electric seat front end trim => [ Power Seat Front Side Trim ] Power Seat Front Side Trim

- Compress clamping pin - 1 - inward and remove expanding clip - 2 -.






- Remove the bolt - 1 - (3.5 Nm).

- Loosen trim - 2 - from seat frame and disconnect wiring harnesses on inner side of trim from switches.

- Remove screw - 3 - (3.5 Nm) and remove trim - 4 - from seat frame.






Installing

- Install in reverse order of removal.