Operation CHARM: Car repair manuals for everyone.

Diagram 7/12 (Tracks 141-154)






IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Throttle Valve Control Module, Fuel Pressure Regulator Valve, Brake Light Switch





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake Light Switch Anti-lock Brake System (ABS) W/ ESP [1][2]Brake Light Switch

G186 - Throttle Drive (for Electronic Power Control (EPC) 2.0L CCTA and CBFA Overviews [1][2]Diagrams

G187 - Throttle Drive Angle Sensor 1 (for Electronic Power Control (EPC) 2.0L CCTA and CBFA Overviews [1][2]Diagrams

G188 - Throttle Drive Angle Sensor 2 (for Electronic Power Control (EPC) 2.0L CCTA and CBFA Overviews [1][2]Diagrams

J338 - Throttle Valve Control Module Locations [1][2]Diagrams

J519 - Vehicle Electrical System Control Module Control Modules in Interior

J623 - Engine Control Module (ECM) Control Modules in Engine Compartment

N276 - Fuel Pressure Regulator Valve Locations [1][2]Diagrams

T2en - Double Connector

T4f - 4-Pin Connector

T6bs - 6-Pin Connector

T14a - 14-Pin Connector, black, connector station 1 in engine compartment, left

T16g - 16-Pin Connector

T60 - 60-Pin Connector

T94 - 94-Pin Connector

(398) - Ground Connection 33 (in main wiring harness)

(639) - Ground Connection (on left A-pillar) Overview Of Ground Connections in Interior

(B335) - Connection 1 (54) (in main wiring harness)

* - Applicable from May 2009

Previous Diagram 7/11 (Tracks 127-140)

Next Diagram 7/13 (Tracks 155-168)