Diagram 13/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Airbag Control Module, Front Passenger's Safety Belt Switch, Seat Occupied Recognition Control Module, Data Bus On Board Diagnostic Interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E25 - Front Passenger's Safety Belt Switch [1][2]Diagrams

G452 - Seat Occupied Recognition Pressure Sensor Passenger Occupant Detection System Overview [1][2]Diagrams

G453 - Seat Occupied Recognition Safety Belt Force Sensor Passenger Occupant Detection System Overview [1][2]Diagrams

J234 - Airbag Control Module Control Modules in Interior [1][2]Air Bag Control Module

J285 - Instrument Cluster Control Module Control Modules in Interior

J519 - Vehicle Electrical System Control Module Control Modules in Interior

J533 - Data Bus On Board Diagnostic Interface Control Modules in Interior

J706 - Seat Occupied Recognition Control Module, below driver's seat Control Modules in Interior Passenger Occupant Detection System Overview [1][2]Diagrams

T3bx - 3-Pin Connector, in front passenger's seat

T5ah - 5-Pin Connector

T10b - 10-Pin Connector, black, connector station front passenger's side, below seat

T18f - 18-Pin Connector

T20e - 20-Pin Connector

T32c - 32-Pin Connector

T100a - 100-Pin Connector

(294) - Ground Connection 9 (in passenger compartment wiring harness)

(B384) - Powertrain CAN-Bus High Connection 2 (in main wiring harness)

(B391) - Powertrain CAN-Bus Low Connection 2 (in main wiring harness)

* - Only applicable to US/CDN

Previous Diagram 13/7 (Tracks 71-84)