Fog Lamp

Fog Lamp

• The illustrations show the procedure for removing and installing the left fog lamp.

• The procedure for removing and installing the right fog lamp is the same.

Removing

- Switch off the ignition and all electrical consumers and move the ignition key or start button into the 0 position (preliminary engaged position).

- Remove the bolt - 1 - and unclip cover - 2 - at the retainers - arrows - from the bumper cover.






- Remove both bolts - arrows -.






- Remove the fog lamp housing - 1 - from the bumper. Be careful of the connected wires.

- Unlock and disconnect the connector - 1 -.






- Remove the fog lamp.

Installing

Install in reverse order of removal. Note the following:

- Tighten the bolts to the specification shown in => [ Fog Lamps Overview ] Fog Lamps Overview.

- After completing assembly work, check function of fog lamp.

- Check fog lamp adjustment and adjust if necessary.