Upper Mounting Tab, Repairing

Upper Mounting Tab, Repairing

- Switch off the ignition and all electrical consumers and move the ignition key or start button into the 0 position (preliminary engaged position).

• During removal and installation, leave ignition key with remote control inside the vehicle to prevent the doors from locking and possibly activating the "Coming Home / Leaving Home" functions on its own.

- Remove the headlamp. Refer to 357 => [ Headlamp ] Headlamp or 358 => [ Headlamp ] Headlamp.

- Remove the rest of the old headlamp mounting tab - 1 - as illustrated.






- Insert the new repair tab - 1 - into the mount - 2 - on the headlamp and secure the tab with the bolts - 3 -.






Bolt tightening specification: 1.4 Nm.

- Install the headlamp.

• If one headlamp is removed, it must always be adjusted after installation.

Adjust the headlamp.