Diagram 7/10 (Tracks 113-126)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Evaporative Emission (EVAP) Canister Purge Regulator Valve 1, Camshaft Adjustment Valve 1, Engine Coolant Temperature (ECT) Sensor (on Radiator)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G83 - Engine Coolant Temperature (ECT) Sensor (on Radiator) Locations Engine Coolant Temperature Sensor On Radiator -G83-

J519 - Vehicle Electrical System Control Module Control Modules in Interior

J623 - Engine Control Module (ECM) Control Modules in Engine Compartment

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 Locations [1][2]Canister Purge Control Valve

N205 - Camshaft Adjustment Valve 1 Locations Camshaft Adjustment Valve 1 -N205-

N318 - Camshaft Adjustment Valve 1 (exhaust) Locations Exhaust Camshaft Adjustment Valve 1 -N318-

T2bz - Double Connector

T2ek - Double Connector

T2ej - Double Connector

T2gt - Double Connector

T14a - 14-Pin Connector, black, connector station 1 in engine compartment, left

T60 - 60-Pin Connector

T94 - 94-Pin Connector

(D180) - Connection (87a) (in engine compartment wiring harness)

* - Applicable from May 2009

Previous Diagram 7/9 (Tracks 99-112)

Next Diagram 7/11 (Tracks 127-140)