Diagram 13/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Airbag Control Module, Safety Belt Switch, Battery Interrupt Igniter, Driver's and Front Passenger's Safety Belt Tensioner Igniter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

A - Battery

E24 - Driver's Safety Belt Switch Driver Seat Belt Switch -E24-

E25 - Front Passenger's Safety Belt Switch [1][2]Diagrams

J234 - Airbag Control Module Control Modules in Interior [1][2]Air Bag Control Module

J519 - Vehicle Electrical System Control Module Control Modules in Interior

N153 - Driver's Safety Belt Tensioner Igniter 1 Locations [1][2]Diagrams

N154 - Front Passenger's Safety Belt Tensioner Igniter 1 Locations [1][2]Diagrams

N253 - Battery Interrupt Igniter

T2g - Double Connector, black, connector station driver's side, below seat

T2h - Double Connector, yellow, connector station driver's side, below seat

T2fu - Double Connector, in front passenger's seat

T2fp - Double Connector, purple

T2fw - Double Connector, in driver seat

T2kt - Double Connector, orange

T2ku - Double Connector, orange

T3aa - 3-Pin Connector, yellow

T3ac - 3-Pin Connector, yellow

T100a - 100-Pin Connector

TV15 - Wire Junction

(294) - Ground Connection 9 (in passenger compartment wiring harness)

* - Only applicable to US/CDN

** - Only engine codes BLV and BWS

*** - Where applicable

Previous Diagram 13/6 (Tracks 57-70)

Next Diagram 13/8 (Tracks 85-98)