Maintenance Test, Performing

Maintenance Test, Performing

Do not check or charge batteries that have a visual indicator that is bright yellow. Jump starting must not be used!

There is a risk of explosion during testing, charging or jump starting.

These batteries must be replaced.

- Select "Maintenance Test".

- Connect the scanner.

• If there is no scanner, manually enter the VIN on the printed test results.

- Scan the VIN.

- Select "at the battery pole" or "at the battery jump start terminal".

- Scan in the battery 2D code or manually select the type and manufacturer in the menu.

- Measure the temperature. Hold the temperature sensor approximately 5 cm above the terminal connection until the temperature is stable.

- Start the test.

- Print out the test report if necessary.