Front Suspension

Fastener Tightening Specifications










• 1 Always replace

• 2 Tighten only in curb weight position

• 3 First pre-tighten diagonally to 10 Nm, then tighten diagonally again to specification

• 4 First, tighten to 100 Nm, then loosen 180° (1/2) turn and retighten to 100 Nm

• 5 Pre-tighten all nuts to 10 Nm

• 6 Vehicle must not be sitting on its wheels when loosening or tightening

• 7 Only tighten when the pendulum support is bolted to the transmission

• 8 For Front Wheel Drive (FWD) only