Front Door Window Adjusting Angle

Front Door Window Adjusting Angle






Adjustment dimensions

• The door window must enter 6 mm - dimension b - into the seal of the window molding.

• The window must rest against the outside of front window guide - 3 - - arrows -.

• The offset with respect to B-pillar trim - 8 - is 1 mm - dimension a -.

- Loosen the nut - 5 - with the side window installation Tool (V.A.G 1739). Adjust with the adjusting screw in the nut - 5 -..

- Tighten the bolt - 5 -, tightening specification: 12 Nm.

The door window must extend in the center - arrows - between inner - 6 - and outer window recess cover - 7 -.

- Remove the front door trim panel..

- Loosen the nut - 4 - with the side window installation Tool (V.A.G 1739). Adjust the dimensions with the adjusting screw in the nut - 4 -.

- Tighten the bolts - 4 -, tightening specification: 12 Nm.