Windshield Wiper System

Windshield Wiper System

DTC recognition and display.

When disconnecting and connecting the battery, always perform the work procedure as described in the repair information => [ Battery, Disconnecting and Connecting ] Removal and Replacement.

• Additional information:

Refer to the Owners Manual.

The Wiper Motor Control Module (J400) and the Windshield Wiper Motor (V) are combined into one assembly.

To remove wiper blades, wiper arms must be driven into "service/winter position". The "service/winter position" is activated by pressing the windshield wiper lever in the "one-touch wiping" position within 10 seconds after switching the ignition off. Refer to the Owner's Manual.






DTC Recognition and Display

Wiper Motor Control Module (J400) is equipped with On Board Diagnostics (OBD) which assists troubleshooting.

The "Guided Fault Finding" function is to be used for troubleshooting of the systems as described as in => [ Vehicle Diagnosis, Testing and Information Systems ] Vehicle Diagnosis, Testing and Information Systems.