Cellular Telephone Preparation Control Head

Cellular Telephone Preparation Control Head

Cell phone operating unit is installed above radio or radio navigation system.

Removing

Do the following before starting the procedure:

- Turn off the ignition and all electrical consumers and remove the key.

- Remove the storage compartment in the instrument panel.

- Release the locking mechanism - arrow - in the storage compartment housing.






- Remove the control head from the housing in the - direction of the arrow -.






- Disconnect the connector - A - and guide it out of the housing.






Installing

Make sure that the wire connection routing to the control head is trouble-free inside the storage compartments housing.

Install in reverse order of removal.