Power Forward/Back Adjustment Unit

Power Forward/Back Adjustment Unit

The following describes removing and installing the seat forward/back adjustment on the left front seat frame. Removal and installation of the right seat longitudinal adjuster is performed in the same way.

Removing

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Remove the front seat. Refer to => [ Front Seat ] Front Seat

- Attach the seat to the fixture for seat repair (VAS 6136).

- Remove the front seat belt latch => [ Front Seat Belt Latches ] Front Seat Belt Latches

- Remove seat cap => [ Cover Cap ] Cover Cap

- Remove electric seat front end trim => [ Power Seat Front Side Trim ] Power Seat Front Side Trim

- Remove electric seat trim => [ Power Seat Trim ] Power Seat Trim

- Remove electric seat trim bracket => [ Power Seat Trim Bracket ] Power Seat Trim Bracket

- Remove front seat backrest. Refer to => [ Left Front Seat Backrest ] Left Front Seat Backrest

- Remove cover and cushion from front seat back rests => [ Front Seat Cushion Cover and Upholstery ] Front Seat Cushion Cover and Upholstery

- Remove screws - 1 - and - 2 - on right side.

- Remove screw - 3 - in rear area.

• Screw - 3 - in installation position points from inside toward outside.

- Remove screw - 4 - in front area.

- Remove seat pan - 5 - from longitudinal adjuster - 6 -.






Installing

- Install in reverse order of removal.