New CSC Roof, Removing From Shipping Container

New CSC Roof, Removing from Shipping Container

• A new CSC roof is delivered in a wooden box. The following steps are important for removing the roof from the shipping container.

• The shipping container must be opened with another technician.






- Remove securing bracket for upper cover and set cover aside.

- Remove the securing bracket on a side panel and and side panel aside. Remove all side panels in order to have sufficient space to move.

- Place the provided four wood beams - 2 - under the shipping container so that it is high enough to guide the workshop crane underneath.

- Guide Shop Crane (VAS 6100) - 1 - with Lift Arm Ext./Workshop Hoist (VAS 6101) - 4 - on marking - 8 - under transport box.

- Secure Roof Suspension Device (VAS 6205) - 5 -, extractor - 6 - with securing strap - 7 - and Shop Crane (VAS 6100) - 1 - with Lift Arm Ext./Workshop Hoist (VAS 6101) - 4 - on roof - 1 - in transport box according to description "CSC roof, removing".

• The roof is bolted into the shipping container and secured to avoid damage during transport.

• Do not open front locking mechanism by pivoting on rear window frame hinge. That leads to damage.






- Open roof pillar front locking mechanism - 2 - by pressing rear locking hooks - 1 - with hydraulic cylinder - arrow -.

- Remove screws on main hinge.

- Raise roof with workshop crane up and out of mounts in shipping container.

- Remove protective film.