Glass Panel, Installing

Glass Panel, Installing

• Make sure all components such the slider and bracket are installed.

• The sliders - 6 - in the slotted guide rail - 8 - are coated in rubber up to the slider - 11 -.

• The washer - 9 - must fit exactly into the openings. The glass panel will make noises if the guiding edge is damaged.

• The lower brace - 12 - faces downward, as illustrated.






- Place the sliders - 6 and 11 - on the slotted rail - 8 -.

- Install the bracket and all the individual parts in this sequence:

• Screw - 10 - washer - 9 -, bracket - 12 -, washer - 5 -, glass panel - 1 -.

• Screw - 10 -, washer - 9 -, guide - 8 -, washer - 5 -, bracket - 12 -.

• Install glass panel only with help from another colleague.






- Guide glass panel guide rails into rear guide rails.

Glass panel must be guided horizontally - a arrows - and parallel when doing this.

- Move roof pillar far enough toward outside - b arrows - so that guide rail slider does not touch the front guide rails.

- Further installation is performed in the reverse order of removal.