Diagram 155/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Airbag control module, Electronic damping control module, Parking aid control module, Data bus on board diagnostic interface, Powertrain CAN bus high connection 1 (in main wiring harness), Powertrain CAN bus low connection 1 (in main wiring harness), LIN bus connection 3 (in main wiring harness)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

C - Generator

J234 - Airbag control module Overview of Control Modules

J250 - Electronic damping control module Adaptive Chassis DCC Components and Locations

J367 - Battery monitoring control module

J446 - Parking aid control module Parking Aid System

J533 - Data bus on board diagnostic interface Overview of Control Modules

T2fn - Double connector

T16h - 16-pin connector

T20 - 20-pin connector

T47b - 47-pin connector

T75 - 75-pin connector

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

(B698) - LIN bus connection 3 (in main wiring harness)

* - Only for vehicles with Start/Stop system

*2 - Refer to applicable engine wiring diagram

Previous Diagram 155/3 (Tracks 15-28)

Next Diagram 155/5 (Tracks 43-56)