Diagram 25/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver's Entry Assistance Control Module, Data Bus On Board Diagnostic Interface, Driver's Seat Lumbar Support Adjustment Switch, Driver's Seat Lumbar Support Adjustment Motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E176 - Driver's Seat Lumbar Support Adjustment Switch

E335 - Lumbar Support Height Adjustment Button

E336 - Lumbar Support Fore/Aft Adjustment Button

J519 - Vehicle Electrical System Control Module Overview of Control Modules

J533 - Data Bus On Board Diagnostic Interface Overview of Control Modules

J572 - Driver's Entry Assistance Control Module

SC34 - Fuse 34 (on fuse panel C) Overview of Fuses

T2em - Double Connector

T2en - Double Connector

T6av - 6-Pin Connector, connector station in driver's Seat

T6aw - 6-Pin Connector

T10a - 10-Pin Connector, black, below driver's seat

T10b - 10-Pin Connector, black, below front passenger's seat

T20 - 20-Pin Connector

T32c - 32-Pin Connector

V125 - Driver's Seat Lumbar Support Curvature Adjustment Motor

V129 - Driver's Seat Lumbar Support Height Adjustment Motor

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

(M9) - Connection (in seat adjustment wiring harness)

* - Only models with electric driver's seat lumbar support adjustment switch

Previous Diagram 25/4 (Tracks 29-42)

Next Diagram 25/6 (Tracks 57-70)