Light Switch (E1)

Light Switch (E1)

The following components are integrated with Light Switch (E1) :

• Fog Lamp Switch (E7)

• Rear Fog Lamp Switch (E18)

• Headlamp Switch Illumination Bulb (L9)

Removal

- Turn off the ignition and all electrical consumers.

- Turn light switch rotary knob to "0" position.

- Push in light switch rotary handle - 1 - and turn it slightly toward right - 2 -.

- Hold rotary handle in this position and remove light switch on rotary handle from instrument cluster - 3 -.






- Disconnect electrical connection - arrow -.






Installation

- Connect the connector to the light switch.

- Hold light switch firmly and press in rotary handle of light switch - 1 - and turn slightly toward right - 2 -.






- Hold rotary handle in this position and insert light switch into instrument cluster - 3 -.

- Turn rotary handle to position "0", release and engage switch.