Manual Lumbar Support

Manual Lumbar Support

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removing

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Remove the front seat. Refer to => [ Front Seat ] Front Seat

- Attach the seat to the fixture for seat repair (VAS 6136).

- Remove the trim from on the tunnel side from the seat. Refer to => [ Seat Trim, Tunnel-Side ] Seat Trim, Tunnel-Side

- Remove the trim on the sill-side from the seat. Refer to => [ Sill-Side Seat Trim ] Sill-Side Seat Trim

- Remove front seat backrest. Refer to => [ Left Front Seat Backrest ] Left Front Seat Backrest

- Attach the backrest to the fixture for seat repair (VAS 6136).

- Remove cover and upholstery from front seat backrest. Refer to => [ Front Seat Backrest Covers and Upholstery ] Front Seat Backrest Covers and Upholstery

- Remove two bolts - 1 - and remove adjusting wheel - 2 - from backrest frame.

- Drill out rivet - 3 -.

- Disengage both upper wires - 4 - of lumbar support from backrest frame.

- Remove lumbar support from backrest frame - 5 -.






Installation

- Install in reverse order of removal.

Use Pop Rivet Pliers (VAS 5072) to install rivet.