Front Suspension

Front Suspension Overview

• Welding and straightening work on supporting or wheel carrying components of suspension is not permitted.

• Always replace self-locking nuts.

• Always replace corroded bolts/nuts.

• Bonded rubber bushings can only be turned to a limited extent. Therefore tighten threaded connections at components with bonded rubber bushings only when wheel bearing housing has been lifted (curb weight position). Refer to => [ Wheel Bearing, Lifting to Curb Weight Position ] Procedures.






I - Refer to => [ Subframe, Stabilizer Bar and Control Arms Assembly Overview ] Subframe, Stabilizer Bar and Control Arms Assembly Overview

II - Refer to => [ Wheel Bearing Assembly Overview ] Wheel Bearing Assembly Overview

III - Refer to => [ Suspension Strut Assembly Overview ] Suspension Strut Assembly Overview

III - Assembly overview, adaptive chassis DCC suspension strut, refer to => [ Front Suspension Strut Assembly Overview ] Front Suspension Strut Assembly Overview.

Drive axle, refer to => [ Drive Axle Overview ] Drive Axle Overview.