Glass Panel Gap Dimensions

Glass Panel Gap Dimensions

• The dimensions specified are necessary for the roof to function correctly.

• The dimensions in new vehicles may differ slightly from what is specified in the information.

• If there are no concerns about function, noise or leaks, an adjustment is not necessary.

• When installing new components, create the same dimensions that existed before.

• Determine the gap dimensions with the setting gauge (VAS 6448).

• Only specified dimensions are on the setting gauge. Tolerances are determined with the adjustment gauge (3371).






1 Glass Panel

2 Roof Center Section

3 Roof Pillar

4 Windshield frame

5 Gap dimension

• 8 mm +/- 1 mm

6 Height dimension

• 0 mm +/- 1 mm

7 Gap dimension

• 7 mm +/- 1.5 mm

8 Height dimension

• 1 mm +/- 1 mm

9 Gap dimension

• 7 mm +/- 1 mm

10 Height dimension

• 0 mm +/- 0.5 mm