Removal and Replacement

Radiator, Fan Shroud and Fans Overview






1 Coolant Fan (V7)

• Removing and installing, refer to => [ Coolant Fan and Coolant Fan 2 ] Coolant Fan and Coolant Fan 2.

2 Nut

• 10 Nm

3 Fan Shroud

4 Lower Coolant Hose

• To the connecting piece for the coolant thermostat.

5 Retaining Clip

6 Engine Coolant Temperature (ECT) Sensor on Radiator (G83)

7 O-ring

• Replace if damaged

8 Upper Coolant Hose

• From the coolant pump.

9 O-ring

• Replace if damaged

10 Bolt

• 5 Nm

• To the charge air cooler.

11 Radiator

• Removing and installing, refer to => [ Radiator ] Service and Repair.

• After replacing, replace the entire amount of coolant.

• Note engine code CBFA: with radiator identification sensor (G611). Refer to => [ Radiator Identification Sensor - Engine
Code CBFA Only ].

12 Nut

• 10 Nm

13 Bolt

• 5 Nm

• To the radiator.

14 Coolant Fan 2 (V177)

• Removing and installing, refer to => [ Coolant Fan and Coolant Fan 2 ] Coolant Fan and Coolant Fan 2.

Radiator Identification Sensor - Engine Code CBFA Only





- Arrow - indicates direction of travel

- A - Radiator

- B - Radiator identification sensor

• The radiator identification sensor can only be replaced with the radiator.