Cylinder Head Assembly: Tools and Equipment
Special Tools
Special tools, testers and auxiliary items required
• Straight Edge 500 mm (VAS 6075)
• Open End Spanner Insert AF 10 (V.A.G 1783/1)
• Compression Tester (V.A.G 1763)
• Spark Plug Removal Tool (3122 B)
• Valve Seal Removal Tool (3364)
• Valve Stem Seal Driver (3365)
• Adapter (T40012)
• Valve Cotters Asm/Disasm Device (VAS 5161)
• Guide Plate for FSI Engine (VAS 5161/19B)
• Engine Sling (2024 A)
• Engine Support (T10014)
• Torque Wrench (40-200 Nm) (V.A.G 1332)
• Shop Crane (VAS 6100)
• Engine Bung set (VAS 6122)
• Drip Tray for VAS 6100 (VAS 6208)
• Polydrive Bit and Drive Socket (T10070)
• Engine Support Bridge (10 - 222A)
• Locking Pin (T10060 A)
• Thrust Piece (T10368)
• Bits (T10099)
• Bracket with Spindle and Hook (10 - 222A/10)
• Adapter (10 - 222A/13)
• Adapter (10 - 222A/22)
• Dial Gauge Holder (VW 387)
• Dial Gauge (0-10 mm) (VAS 6079)
• Torque Wrench (5-60 Nm) (V.A.G 1783)
• Engine Support Feet (10 - 222A/8)
• Bracket for Engine (10 - 222A/1)
• Shackle (10 - 222A/12)
• Lifting Eyebolt (3368)
• Thrust Piece (T10354)
• Pulling Hook (T20143)
• Puller (T10394)
• Puller (T10055)
Special tools, testers and auxiliary items required
• Thrust Piece (T10174)
• Assembly Tool (T10352)
• Counter Hold Tool (T10355)
• Locking Pin (T40011)
• Ignition Coil Puller (T40039)
• Torque Wrench (5-50 Nm) (V.A.G 1331)