Diagram 183/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Airbag Control Module, Safety Belt Switch, Front Passenger's Seat Occupied Sensor, Battery Disconnecting Switch





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E24 - Driver's Safety Belt Switch

E25 - Front Passenger's Safety Belt Switch Passive Occupant Detection System Overview

G128 - Front Passenger's Seat Occupied Sensor

J234 - Airbag Control Module, behind lower console Control Modules in Front Part of Vehicle

J519 - Vehicle Electrical System Control Module

N253 - Battery Interrupt Igniter

T2an - Double Connector

T2q - Double Connector, below driver's seat

T2y - Double Connector, below front passenger's seat

T75 - 75-Pin Connector

(109) - Ground Connection (in airbag wiring harness)

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

*** - Only models without front passenger's seat occupied sensor

- - - - Only models with front passenger's seat occupied sensor

**** - Only engine code BUB

Previous Diagram 183/6 (Tracks 57-70)

Next Diagram 183/8 (Tracks 85-98)