Drive Axle with CV Joint VL107 Attached Assembly Overview

Drive Axle with CV Joint VL107 Attached Assembly Overview





1 Outer Constant Velocity Joint

• Replace only as complete unit

• Removing => [ Removing Outer Constant Velocity
Joint ] Drive Axle with CV Joint VL107 Attached

• Installing: Using a plastic hammer, drive onto the shaft as far as the stop

• Checking, refer to=> [ Outer CV Joint VL107, Checking ] Outer CV Joint VL107, Checking

2 Bolt

• Always replace after removal

• 70 Nm plus an additional 90° turn

Vehicle must not be standing on its wheels when loosening or tightening

3 Securing Ring

• Always replace after removal

• Insert in shaft groove

4 Thrust Washer

• Installed position => [ Installed Location of Spring
Washer and Thrust Washer on Outer Joint ] Drive Axle with CV Joint VL107 Attached

5 Dished Washer

• Installed position => [ Installed Location of Spring
Washer and Thrust Washer on Outer Joint ] Drive Axle with CV Joint VL107 Attached

6 Clamp

• Always replace after removal

• Tensioning => [ Tightening Hose Clamp on Outer
Joint ] Drive Axle with CV Joint VL107 Attached

7 Protective Boot

• Check for tears and scuffing

• Material: polyelastomer

8 Clamp

• Always replace after removal

• Tensioning => [ Tensioning Clamp on Small Diameter ] Drive Axle with CV Joint VL107 Attached

9 Drive Axle

10 Clamp

• Always replace after removal

• Tensioning => [ Tensioning Clamp on Small Diameter ] Drive Axle with CV Joint VL107 Attached

11 CV Joint Protective Boot

• Material: polyelastomer

• Without ventilation bore

• Check for tears and scuffing

12 Securing Ring

• Always replace after removal

• Insert in shaft groove

13 Clamp

• Always replace after removal

• Tensioning => [ Tightening Hose Clamp on Outer
Joint ] Drive Axle with CV Joint VL107 Attached

14 CV Joint

• Replace only as complete unit

• Removing => [ Removing the Inner CV Joint ] Drive Axle with CV Joint VL107 Attached

• Installing: Using a plastic hammer, drive onto the shaft as far as the stop