Front Door Window Glass: Adjustments

Door Window, Adjusting

- Removing front door trim.

- Pry out cover caps - 4 -.

- Lower door window - 1 - until locking screws - 3 - for mount - 2 - are accessible.


Loosen screw - 3 - from inside by turning toward right.

- Loosen bolts - 3 - (do not remove) from inside by turning toward right and press apart clamping brackets.





- Press door window - 1 - using light pressure into clamping brackets - direction of arrow - and align door window to rear window guide without exerting pressure.





While doing this, make sure that door window - 1 - stands parallel to window guide.

- Tighten clamping brackets with bolts from inside by turning toward left.

Tightening specification for bolt: 8 Nm

- Perform function test.

Further installation is in reverse order of removal.