Mirror Base, Installing

Interior Rearview Mirror with Rain Sensor Retaining Plate

• Removal of windshield is no longer necessary, as with previous repair procedure.

• At the same time, it is possible to re-use the old, detached mirror base.

Mirror Base, Installing

- Apply 2K polyurethane adhesive (D 180 KD2 A1) directly to the sanded and cleaned mirror base adhesive surface.

- Adhesive diameter: approximately 2.5 to 3 mm.

- Immediately after applying adhesive on mirror base, press onto prepared windshield.

- Align mirror base on its designated position on ceramic coating and secure using adhesive tape.