Diagram 64/18 (Tracks 225-238)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Ground splices





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E425 - Backrest Adjustment Button

G59 - Driver's Heated Seat Temperature Sensor

J131 - Driver's Heated Seat Control Module Locations Heated Driver Seat Control Module -J131-

J136 - Memory Seat/Steering Column Adjustment Control Module

J519 - Vehicle Electrical System Control Module Locations Locations

T2d - Double Connector

T4l - 4-Pin Connector

T4at - 4-Pin Connector

T6g - 6-Pin Connector

T8ac - 8-Pin Connector

T10a - 10-Pin Connector

Z6 - Driver's Seat Heating Element

Z7 - Driver's Backrest Heating Element

Z31 - Driver's Seat Side Bolster Heater

(77) - Ground Connection (on left lower B-pillar)

(95) - Ground Connection 1 (in power seat wiring harness) Location: In power seat wiring harness between wiring circuits for V296 - Front Seat Height Adjustment Motor and J136 - Memory Seat/Steering Column Adjustment Control Module

(96) - Ground Connection 1 (in heated seats wiring harness) Location: In heated seats wiring harness between wiring circuits for E24 - Driver's Safety Belt Switch and Z7 - Driver's Backrest Heating Element

(136) - Ground Connection 2 (in heated seats wiring harness) Location: In heated seats wiring harness inside of seat

(*) - Power seats, power driver's seat with memory only

Previous Diagram 64/17 (Tracks 211-224)

Next Diagram 64/19 (Tracks 239-252)