Diagram 146/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Steering Torque Sensor, Power Supply Relay (terminal 15), Power Steering Control Module, Vehicle Electrical System Control Module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G85 - Steering Angle Sensor Locations

G269 - Steering Torque Sensor Electromechanical Steering Gear Assembly Overview - Generation 2

J329 - Power Supply Relay (terminal 15) Locations

J500 - Power Steering Control Module Locations

J519 - Vehicle Electrical System Control Module Locations Locations

J533 - Data Bus On Board Diagnostic Interface Locations Locations

J623 - Engine Control Module (ECM) Locations

SA2 - Fuse 2 (on fuse panel A)

T2l - Double Connector

T3ao - 3-Pin Connector

T4ae - 4-Pin Connector

T5g - 5-Pin Connector

T6z - 6-Pin Connector, beside left headlamp

T20 - 20-Pin Connector

T94 - 94-Pin Connector

V187 - Electro-mechanical Power Steering Motor Electromechanical Steering Gear Assembly Overview - Generation 2

(640) - Ground Connection (in engine compartment, left)

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

Previous Diagram 146/2 (Tracks 1-14)